DGB Solo Mining · 0% Fee
Point. Mine.
Collect.
Solo mine DigiByte from home with any SHA-256 ASIC. No account needed. Your DGB address is your login. If you find a block, 100% of the reward goes directly to your wallet.
✓Pool selected
2Enter address
3Configure
4Mining
Stratum Config
0% Fee
Port
Standard TCP — works with all miners
TLS encrypted — use for restrictive firewalls
High hashrate port — for large ASICs (S21-class and above)
Hostdgb.solopool.eu
Port
User
Passx
Enter your DGB address to auto-fill config
Compatible Devices
Works with your miner.
Any SHA-256 Stratum V1 device works. These are tested on BCH and are fully compatible.
Bitaxe 401
BM1366 · ~500 GH/s
Tested
Bitaxe Gamma 601
BM1370 · ~1.2 TH/s
Tested
NerdQaxe+
BM1366 ×4 · ~850 GH/s
Tested
LuckyMiner L1
BM1366 · ~500 GH/s
Tested
Bitaxe Supra 405
BM1368 · ~600 GH/s
Tested
Standard ASIC
Various · Varies
Stratum V1
Device Guides
Step-by-step setup.
Exact firmware navigation paths for each device.
Bitaxe (AxeOS)
1
Open your Bitaxe IP address in a browser. Find it in your router or serial output.
2
Go to Settings → Pool
3
Fill in:
dgb.solopool.eu
3335
YOUR_DGB_ADDRESS.bitaxe1
4
Click Save. Miner reboots. If share count rises, you're live.
NerdQaxe
1
Connect to the NerdQaxe IP in your browser.
2
Navigate to Settings → Pool Config
3
Fill in:
dgb.solopool.eu
3335
YOUR_DGB_ADDRESS.nerdqaxe1
4
Save and reboot. Shares should start within 60 seconds.
Other ASIC
1
Open your miner's web interface or management software.
2
Go to pool/stratum configuration settings.
3
Fill in:
stratum+tcp://dgb.solopool.eu:3335
YOUR_DGB_ADDRESS.worker1
x
4
Save. The miner reconnects automatically.
Large ASIC (S21-class)
High Hashrate port recommended
1
Open your miner's web interface or management software.
2
Go to pool / miner configuration and set Pool 1.
3
Fill in:
stratum+tcp://dgb.solopool.eu:4335
YOUR_DGB_ADDRESS.worker1
x
4
Save and restart. Use port 3335 as fallback if preferred.
Payout Flow
What happens when you win.
From block found to DGB in your wallet — 0% fee, 100% yours.
01
Block found
Your miner finds a valid hash that meets full DGB network difficulty.
02
We submit it
Our DGB node broadcasts the block to the network instantly.
03
Network confirms
The DGB network validates the block. Confirmation is fast (~15 seconds per block).
04
Wallet receives
≈262.24 DGB sent directly to your address. 0% fee — you keep it all.
FAQ
Common questions.
Check the host is exactly dgb.solopool.eu and port 3335. No stratum+tcp:// prefix in the host field. Reboot after saving.
Check the share count in your miner's web interface. If it's going up, you're connected.
Standard DigiByte addresses start with D. Use any DGB wallet such as the official DigiByte wallet or Exodus.
It's just a label. Use different names if you have multiple miners on the same DGB address.
Almost certainly not. As long as shares are submitting, everything is working. Finding a block depends on luck and your hashrate.
Yes. DGB is launching at 0% pool fee — you keep the full block reward when you find a block.
Yes, with separate miners. Point one device at bch.solopool.eu:3333 and another at dgb.solopool.eu:3335.
Yes. Use port 3336 for Stratum V1 over TLS. Port 3335 is plain TCP (no encryption).
Stuck? Come chat.
Our Discord is where miners help each other. Config questions, hardware tips, block celebrations.
Join Discord